CAMERAS TEST FILE (CAM17-16/X219 EEV) Last Update: 02/06/04 B. Mours Last Update: 28/07/04 D. Verkindt Remark: The "driver" is the small board in the black box located ------ in the back of the camera. SN=973022======================================== Location: North Bench (B7) 29/10/97 C.D. tested Mean=13.91, Sigma=0.38 (G=0,I=300) 6/98 Driver send to Pisa 4/5/00 B.M. Check Location 15/09/00 R.F. Sent to EEV to change capacitor 5/10/00 R.F. Received and tested: failed Problem with lines, high level in upper left corner Sent to EEV 15/11/00 R.K. Received and tested: Mean=20, Sigma=0.84 (G=0,I=500) 30/11/00 R.F. Sent to Cascina 10/04/01 R.F. Installed on North Bench SN=973023=========================================Location: Ancien bureau LAPP Cascina 27/11/97 C.D. tested Mean=10.21, Sigma=0.91 (G=0,I=300) 6/98 G.D. Driver OK 4/05/00 B.M. Check Location (False location: LAPP Office) 7/05/99 EEV: Repair: Horizontal line frame at 15 lines 30/05/00 B.M. Received and tested: Mean=20.8, Sigma=3.7; Problem: Non uniform image. 12/06/00 B.M. Send to EEV for repair 28/07/00 B.M. Received and tested ok: Mean=12.1, Sigma=0.33; 5/10/00 R.F. Tested again. Problem: Non uniform image (~flaminio/camera/cam23.gif) 6/10/00 R.F. Tested again. Problem disappers, Mean=12.4, Sigma=0.5 15/11/00 R.K. Tested again. Problem: Non uniform image Mean=14.6, Sigma=0.92 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=9.2, Sigma=0.41; 02/03/04 B.M. Sent to Cascina 30/03/04 B.M. Installed on the Detection Brewster by J.M. 28/07/04 D.V. Installed on the C64 (Mode Cleaner Suspension) SN=973023bis ???===================================Location: ?? 7/09/00 R.F. Found in Cascina LAPP office 15/09/00 R.F. Sent to EEV to change capacitor 5/10/00 R.F. Received and tested ok: Mean=9.1, Sigma=0.4; 11/10/00 R.F. Installed on the external bench B5 01/03/07 E.T. Not working after OFF/ON of the VME crate (no image on video output and B5_Pwr = 0) => removed SN=973024=========================================Location: ??? 29/10/97 C.D. tested Mean=9.83, Sigma=0.41 (G=0,I=300) 26/06/98 Driver send to Pisa 28/07/04 Lapp Office SN=973025=========================================Location: Cascina office 27/11/97 C.D. tested Mean=12.5, Sigma=0.65 (G=0,I=300) 6/98 G.D. Driver OK 10/08/98 G.D. Return from repair (fuse changed) 4/5/00 B.M. Check Location( using file) 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=10, Sigma=0.53; 4/02/02 B.M. Move to Cascina (lapp office) 29/11/07 E.T. Removed from WE (GxS86) SN=973026=========================================Location: Mem Position (BS) 27/11/97 C.D. tested Mean=14.21, Sigma=0.43 (G=0,I=300) 6/98 G.D. Driver OK 31/07/00 R.F. Problems with lines 4/08/00 R.F. Sent to EEV (capacitor changed) 5/10/00 R.F. Received and tested ok: Mean=10, Sigma=0.5; 11/10/00 R.F. Installed by Ettore for BS memory position SN=973027=========================================Location: Mem Position (PR) 27/11/97 C.D. tested Mean=9.14, Sigma=0.65 (G=0,I=300) 6/98 G.D. Driver OK 21/07/00 B.M. Removed from DBench: Problem with 15 lines frame 4/08/00 R.F. Sent to EEV (capacitor changed) 5/10/00 R.F. Received and tested ok: Mean=14, Sigma=0.4; 11/10/00 R.F. Installed by Ettore for PR memory position SN=973028=========================================Location: Injection Bench position 31/10/97 C.D. tested Mean=12.5, Sigma=1.47 (G=0,I=300) 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 11/10/00 R.F. Dismounted from BS memory position 15/11/00 R.K. Tested before sending: Mean=13.7, Sigma=1.34 (G=0,I=500) 4/01/01 R.K. Sent to EEV (capacitor changed) 22/02/01 R.K. Received and tested ok: Mean=10, Sigma=0.53; 4/02/02 B.M. Move to Cascina (lapp office) 24/04/02 G.G. Give to HH for Injection Tower installation xx/09/03 B.M. Give it to Ettore for WI tower ? SN=973029=========================================Location: WE GxS86 27/11/97 C.D. test failed 4/06/98 B.M. returned from EEV, Check: Mean=10.00, Sigma=0.35 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 15/09/00 R.F. Sent to EEV to change capacitor 5/10/00 R.F. Received and tested: failed Problem with large background Sent to EEV 15/11/00 R.K Received and tested: Mean=10, Sigma=0.73 (G=0,I=500) 30/11/00 R.F. Sent to Cascina 10/04/01 R.F. Installed on West Bench ?? Removed because saturate at a low value 02/06/04 B.M. Saturate at 64 but works fine if gain set to 1 volt 29/11/07 E.T. Installed at WE (GxS86) by Ettore SN=973030=========================================Location: Cascina office 31/10/97 C.D. returned from EEV, Check: Mean=12.24, Sigma=0.48 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 23/01/01 R.F. Got camera from Henrich 29/01/01 R.K. tested: ok, Mean=8.6, Sigma=0.91 (G=0.,I=500) 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=10, Sigma=0.54; 4/02/02 B.M. Move to Cascina (lapp office) 28/05/02 A.M. Give it to H.H. for the injection bench SN=973031=========================================Location: Cascina Office 29/10/97 C.D. tested Mean=11.42, Sigma=0.52 (G=0,I=300) 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 11/10/00 R.F. Dismounted from PR memory position 15/11/00 R.K. Tested : low output, Mean=14, Sigma=0.64 (G=0,I=500) 4/01/01 R.K. Sent to EEV (capacitor changed) 22/02/01 R.K. Received and tested ok: Mean=13, Sigma=0.71; ?? Removed because saturate at a low value 02/06/04 B.M. Saturate at 100 but works fine if gain set to 1 volt 02/03/07 E.T. Installed on external detection bench (B1s) 05/03/07 E.T. Saturate at 250 whatever the gain/integration time 11/29/07 E.T. Temporarily installed at WE back went all 'white' after 2 days SN=973032=========================================Location: Cascina Office 31/10/97 C.D. tested Mean=8.42, Sigma=0.49 (G=0,I=300) 6/98 G.D. Driver OK 21/07/00 R.F. Install on bench 23/01/01 R.F. Dismounted from DB (B1) 29/01/01 R.K. tested: ok, Mean=10.6, Sigma=0.58 (G=0.,I=500) 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=6, Sigma=0.12; 4/02/02 B.M. Move to Cascina (lapp office) 28/05/02 A.M. Give it to HH for the injection bench ?? Removed because saturate at a low value + burned cover 02/06/04 B.M. Saturate at 64 but works fine if gain set to 1 volt 21/03/07 E.T. Installed on external bench on B1s SN=973033=========================================Location: Annecy optical lab 31/10/97 C.D. tested Mean=8.78, Sigma=0.40 (G=0,I=300) 6/98 G.D. Driver OK 21/07/00 R.F. Install on external Bench 29/09/00 R.F. Dismounted from external bench 3/10/00 R.F. Sent to EEV to change capacitor 15/11/00 R.K Received and tested: Mean=12, Sigma=0.63 (G=0,I=500) 30/11/00 R.F. Sent to Cascina 15/01/01 R.F. Installed on external bench ?? Removed because saturate at a low value + burned cover 02/06/04 B.M. Saturate at 16 but works fine if gain set to 1 volt SN=973034=========================================Location: Rome 27/11/97 C.D. tested Mean=14.52, Sigma=0.53 (G=0,I=300) 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 11/10/00 R.F. Dismounted from BS memory position 15/11/00 R.K. Tested before sending: Mean=11, Sigma=1.9 (G=0,I=500) 4/01/01 R.K. Sent to EEV (capacitor changed) 22/02/01 R.K. Received and tested ok: Mean=11, Sigma=0.72; SN=973035=========================================Location: Mem Position (WI) 27/11/97 C.D. tested Mean=13.05, Sigma=0.41 (G=0,I=300) 6/98 G.D. Driver OK 21/07/00 R.F. Removed from DBench: Problem with 15 lines frame 4/08/00 R.F. Sent to EEV (capacitor changed) 5/10/00 R.F. Received and tested ok: Mean=14, Sigma=0.7; 11/10/00 R.F. Installed by Ettore for WI memory position SN=973036=========================================Location: Annecy elec. lab. 27/11/97 C.D. tested Mean=13.77, Sigma=0.43 (G=0,I=300) 6/98 G.D. Driver OK 21/07/00 R.F. Check location 23/01/00 R.F. Dismounted from DB (B1s) 29/01/01 R.K. tested: not ok, Mean=38.7, Sigma=6.4 (G=0.,I=500) 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=4.1, Sigma=0.37; ?? Removed because saturate at a low value + burned cover 02/06/04 B.M. Saturate at 64 but works fine if gain set to 1 volt SN=973037=========================================Location: Mem Position (NI) 27/11/97 C.D. tested Mean=12.25, Sigma=0.46 (G=0,I=300) 6/98 G.D. Driver OK 21/07/00 R.F. Removed from DBench: Problem with 15 lines frame 4/08/00 R.F. Sent to EEV (capacitor changed) 5/10/00 R.F. Received and tested ok: Mean=13, Sigma=0.45; 11/10/00 R.F. Installed by Ettore for NI memory position 27/05/02 R.F. The camera gain change in an impredictible way. Remove from NI SN=973038=========================================Location: Detect. Bench (B1p or B5??) 27/11/97 C.D. tested Mean=14.19, Sigma=0.48 (G=0,I=300) 6/98 G.D. Driver OK 30/5/00 B.M. Problem with Horizontal line frame at 15 line 4/08/00 R.F. Sent to EEV (capacitor changed) 5/10/00 R.F. Received and tested ok: Mean=12, Sigma=0.6; 11/10/00 R.F. Installed by Raffaele on external bench E.T. Removed from B5 ?? SN=973039=========================================Location: Cascina office 27/11/97 C.D. tested Mean=16.18, Sigma=0.50 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 23/01/01 R.F. got from Henrich 29/01/01 R.K. tested: not ok, Mean=15.3, Sigma=3 (G=0.,I=500) 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=3, Sigma=0.4; 4/02/02 B.M. Move to CascinA 24/04/02 B.M. Tested on the injection bench by HH. Saturate only at 170. SN=973040=========================================Location: Mem Position (DB) 27/11/97 C.D. tested Mean=8.76, Sigma=0.42 (G=0,I=300) 6/98 G.D. Driver OK 7/05/99 EEV: Repair: Horizontal line frame at 15 lines 30/05/00 B.M. Received and tested ok: Mean=10.4, Sigma=0.52 15/09/00 R.F. Sent to EEV to change capacitor 5/10/00 R.F. Received and tested ok: Mean=9.1, Sigma=0.38; 11/10/00 R.F. Installed by Raffaele for DB memory position SN=973041=========================================Location: North Bench (B7') 27/11/97 C.D. tested Mean=14.01, Sigma=0.33 (G=0,I=300) 6/98 G.D. Driver OK 30/05/00 B.M. Check Location 22/08/00 R.F. Problem with lines (start=14 period=17) 15/09/00 R.F. Sent to EEV to change capacitor 5/10/00 R.F. Received and tested ok: Mean=11.3, Sigma=0.45; 11/10/00 R.F. tested for DB memory position: low output level 15/11/00 R.K. tested: low output, Mean=12.9, Sigma=0.45 (G=0.,I=500) 29/01/01 R.K. tested: ok, Mean=12, Sigma=0.58 (G=0.,I=500) 13/02/01 R.F. given to Ettore for North bench SN=973042=========================================Location: Cascina office 29/10/97 C.D. tested Mean=9.13, Sigma=0.34 (G=0,I=300) 6/98 G.D. Driver OK 30/09/99 R.F. Installed by Raffaele for DB memory position 11/10/00 R.F. Dismounted from DB memory position 15/11/00 R.K. Tested: Mean=10, Sigma=0.8 (G=0,I=500) 4/01/01 R.K. Sent to EEV (capacitor changed) 22/02/01 R.K. Received and tested ok: Mean=12, Sigma=0.4; 4/02/02 B.M. Move to Cascina (LAPP office) 27/02/02 R.F. Ettore install it on the NI memory position 30/10/02 E.M. Camera misfunctioning: its response gets lower and lower.Remove it from NI SN=973043=========================================Location: Annecy Elec. Lab. 27/11/97 C.D. tested Mean=13.09, Sigma=0.32 (G=0,I=300) 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 11/10/00 R.F. Dismounted from NI memory position 15/11/00 R.K. Tested: small defect up-left 4/01/01 R.K. Sent to EEV (capacitor changed) 22/02/01 R.K. Received and tested ok: Mean=13, Sigma=0.43; SN=973044=========================================Location: Cascina office 27/11/97 C.D. tested Mean=13.64, Sigma=0.48 6/98 G.D. Driver OK 4/5/00 B.M. Check Location 29/09/00 R.F. Received from Henrich 3/10/00 R.F. Sent to EEV to change capacitor 15/11/00 R.K Received and tested: Mean=12.5, Sigma=0.79 (G=0,I=500) 30/11/00 R.F. Sent to Cascina SN=973230=========================================Location: Detect. Bench (B5) 6/04/99 G.D. tested Mean=15.9, Sigma=0.47 (G=0,I=300) 7/05/99 EEV: Repair: The Camera output was saturating (always 255) 30/05/00 B.M. Received and tested ok: Mean=15.46, Sigma=0.65 19/06/00 B.M. Send to Cascina 15/09/00 R.F. Sent to EEV to change capacitor 5/10/00 R.F. Received and tested ok: Mean=13.9, Sigma=0.51; 15/11/00 R.K Received and tested: Mean=13.3, Sigma=0.91 (G=0,I=500) 30/11/00 R.F. Sent to Cascina 15/01/01 R.F. Installed on external bench B1s 01/03/07 E.T. Moved to B5 beam SN=973232=========================================Location: Cascina office 6/04/99 G.D. tested Mean=13.6, Sigma=0.50 (G=0,I=300) 4/5/00 B.M. Check Location 29/09/00 R.F. Received from Henrich 3/10/00 R.F. Sent to EEV to change capacitor 15/11/00 R.K Received and tested: Mean=13.9, Sigma=0.64 (G=0,I=500) 30/11/00 R.F. Sent to Cascina SN=973233=========================================Location: Cascina office 6/04/99 G.D. tested Mean=13.9, Sigma=0.50 (G=0,I=300) 22/08/00 R.F. Found 990233 in Elec. Lab. 1/03/01 R.K. Sent to EEV (capacitor changed) 30/04/01 R.K. Received and tested ok: Mean=12, Sigma=0.44; 4/02/02 B.M. Move to Cascina /06/03 B.M. Give it to Ettore for NE SN=973234=========================================Location: Cascina office 6/04/99 G.D. tested Mean=13.8, Sigma=0.47 (G=0,I=300) 4/5/00 B.M. Check Location 29/09/00 R.F. Received from Henrich 3/10/00 R.F. Sent to EEV to change capacitor 15/11/00 R.K Received and tested: Mean=11, Sigma=0.74 (G=0,I=500) 30/11/00 R.F. Sent to Cascina SN=973235=========================================Location: North Bench 6/04/99 G.D. tested Mean=15.8, Sigma=0.4 (G=0,I=300) 7/05/99 EEV: Replace the video support board 30/05/00 B.M. Received it and test ok: Mean=17.6, Sigma=1.03 19/06/00 B.M. Send to Cascina 21/07/00 R.F. Install on external bench 29/09/00 R.F. Dismount from external bench 3/10/00 R.F. Sent to EEV to change capacitor 15/11/00 R.K. tested: low output, Mean=14.5, Sigma=0.71 (G=0.,I=500) 29/01/01 R.K. tested: ok, Mean=15.5, Sigma=0.95 (G=0.,I=500) 22/02/01 R.F. mounted on north bench test beam alignment high level at the bottom ? 13/03/02 B.M. Install on the MC tower for bench position. =============================================================================== Camera with no number: - 1 in LAPP-Office Cascina not properly labeled (973023??) - 1 on DB memory position (Cascina) - 1 on optical tables in Annecy without number (stabilitty measurement) - 1 lost??(Check in S. Piero??) --------------------------------------------------------------------------------- Cables L = 5m sn = 1 Cascina C72 sn = - Annecy elec. lab. L = 6m sn = 1 Roma sn = 2 Cascina C82 sn = 3 Cascina C82 sn = 4 ??? sn = 5 LAPP office Cascina sn = 6 LAPP office Cascina sn = 7 Cascina C72 L = 10m sn = 1 Bureau Lapp, Cascina sn = 2 Detection Bench C25 sn = 3 Detection Bench C25 sn = 4 Detection Bench C25 sn = 5 Detection Bench C25 L = 15m sn = 1 Tables optique Annecy ??? L = 20m sn = 1 Bureau Lapp, Cascina ??? sn = 2 Mem. Position BS C44 sn = 3 ??? sn = 4 Mem. Position PR C42 L = 25m sn = 1 Mem. Position IB C40 sn = 2 Mem. Position Detection Bench C50 sn = 3 Non-Lin alignment WI par terre sn = 4 Non-Lin alignment NI C57 L = 30m sn = 1 Mem. Position WI C46 sn = 2 Mem. Position NI C48 L = 35m sn = 1 Laser, Cascina C56 sn = 2 Laser, Cascina C56 sn = 3 Laser, Cascina C56 sn = 4 Laser, Cascina C56 sn = 5 Laser, Cascina C56