Last modification: 07/06/02 F.MOREAU DATA BASE FOR PREAMPLIS AND DEMODULATION BOARDS FEATURES Gain RF can be 2, 4 or 8 (except for board 31 and 32 where the gain is 12, 30 or 55) R MC/ADC is the resistance of the current/tension converter (R56) Gc is the gain of the compression filter (f<12Hz --> Gc=1 f>12Hz --> Gc=35) MC* : For the board 31, 32, 17, 18, 25 and 26 on the MC output, the signal of the Phase (0°) without anti-alias is provided. In the column Crate : -CXX indicates the crate where the board is installed -CA indicates a board not installed at Cascina -AN indicates a board not installed at Annecy Necessary to verify the total gain for 33, 34 and 35 (input ampli modified) >>>>>>>>>>>>>>>>> 35 Preamplis and Demodulation boards <<<<<<<<<<<<<<<<<<< ____________________________________________________________________________________ Board|Crate |Photo-|Voies| R eq. | R |Gain |Anti- |Compres|Multiplicative N° | |diodes| |preampli|MC/ADC| RF |Alias | filter| Factor | | | | (Ohm) |(Ohm) | | | | _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 1 | C32 | D1-1 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 2 | C32 | D1-2 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 3 | C32 | D1-3 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 4 | C32 | D1-4 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 5 | C32 | D1-5 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 6 | C32 | D1-6 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 7 | C32 | D1-7 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 4 | Y | Y |250x4/2x0.56x10xGc 8 | C32 | D1-8 |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 9 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 10 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 11 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 12 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 13 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 14 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 15 | AN | D1-15|MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 16 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 17 | C30 | D2 |MC* | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 18 | C30 | D2 |MC* | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 19 | C30 | D2' |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 20 | C30 | D2' |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 21 | C30 | D1" |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | |Modify|P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 22 | AN |6.25 |MC | / | 50 | / | N | / |50x1 | |MHz |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 23 | CA | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 24 | AN | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 25 | C30 | D5 |MC* | / | 50 | / | N | / |1kx1 | | |ADC | / | 50 | / | Y | / |1kx1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 26 | C30 | D5 |MC* | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 27 | CA | |MC | / | 50k | / | N | / |50kx1 | | |ADC | / | 50k | / | Y | / |50kx1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 28 | CA | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 29 | CA | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2 | Y | Y |250x2/2x0.56x10xGc 30 | C30 | D1" |MC* | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 30 | Y | Y |250x30/2x0.56x10xGc 31 | C32 | D1' |MC* | / | 1k | / | N | / |1kx1 | | |ADC | / | 1k | / | Y | / |1kx1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 30 | Y | Y |250x2/2x0.56x10xGc 32 | CA | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 2000| Y | Y |250x2000/2x0.56x10xGc 33 | CA | |MC | / | 50k | / | N | / |50kx1 | | |ADC | / | 50k | / | Y | / |50kx1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 53 | Y | Y |250x53/2x0.56x10xGc 34 | CA | |MC | / | 2.55k| / | N | / |2.55kx1 | | |ADC | / | 2.55k| / | Y | / |2.55kx1 _____|______|______|_____|________|______|_____|______|_______|____________________ | | |P/Q | 250 | / | 107 | Y | Y |250x107/2x0.56x10xGc 35 | CA | |MC | / | 50 | / | N | / |50x1 | | |ADC | / | 50 | / | Y | / |50x1 _____|______|______|_____|________|______|_____|______|_______|____________________